FEATURES AND BENEFITS
This new connector series utilizes Amphenol’s durable and reliable B³ contact system in a rugged, non-floating Rack and Panel connector. Included in this series are digital and power/digital “hybrid” insert arrangements.  The hybrid series utilizes Amphenol’s high performance RADSOK® power contacts along with Amphenol’s proven B³ contact.

FEATURES AND BENEFITS

• Exceeds many MIL-DTL-38999 performance requirements
• Utilizes Amphenol’s low mating force brush contacts
• 0.100” x 0.100” square grid footprint
• Load bearing shells (supports module to rack interface)
• Tapered connector mating surfaces provide near zero X-Y plane movement between mated connectors.
• EMI/ESD protection in both connector halves:
• EMI at mounting surfaces and connector interface (38999 III level)
• ESD features allow use of Class 3 hardened chips (4KV max. voltage)
• Signal speeds to 3.125 Gbps - (per differential pair and based on intelligent assignment of ground/signal pairs)
• Capable of 500 mating cycles
• Water tight seals both at connector interface and to mounting surfaces
• “Hybrids” available - combining signal contacts with power or RF contacts