OVERVIEW
The MIL-DTL-83723 series provides many choices within the range of a medium sized, environmentally resistant cylindrical connector. With three coupling style choices - bayonet, threaded and quick-disconnect the versatility of this family makes it increasingly popular for panel mount, box mount and line-to-line applications in aircraft. For general duty environmentally resistant requirements, this family of connectors provides a wide range of interconnection solutions.

MIL-DTL-83723 Series Ill-high temperature - Using MIL-DTL-83723 Series Ill design concepts, Pyle-National has also developed a series of High Temperature firewall connectors, that are capable of operation at 260" C/500° F. A 100% scoop-proof version of the high temperature connector is also available under specificaton ESC 11/Pyle HTK Series. In addition, this connector series incorporates a unique sealing grommet that is capable of sealing on standard diameter wire as well as Kapton wire of reduced diameter.

FEATURES AND BENEFITS
This connector was developed for the higher operating temperatures inherent in today's newest high performance aircraft and aircraft engines. These connectors meet the performance requirements of the following specifications:

  • Recommended operating voltage to 600 VAC (RMS) at
    sea level
  • Complete environmental sealing includes individual contact seals and a silicone elastomer interfacial seal with raised barriers around each pin, a shell-to-shell seal and an insert-to-shell seal. Sealing over a wide range of wire diameters is assured by a triple-webbed
    grommet design
  • Captive coupling nut prevents tampering, while a reduced coupling ring ramp allows easier mating
  • Incorporates crimp rear release contacts in sizes 12, 16 and 20; contact arrangements accept
    2 to 61 circuits
  • Contacts conform to SAE-AS39029 and use standard qualified rear-release type plastic tools
  • Insertion and removal of contacts from the rear of the connector assures no damage to the front that might affect the sealing characteristics
  • Grommets are constructed of tear-resistant elastomer and experience no degradation when exposed to a broad range of fluids
  • Closed entry socket side of the insert is designed with a lead-in chamfer and a hard face that will accept a pin contact bent within pre-established limits