MIL-DTL-26482 Series II Connectors

Product MIL-DTL-26482 Series II Connectors Product MIL-DTL-26482 Series II Connectors

Contact:

Brandon Brown
Product Manager
+1 (607) 563-5685
bbrown@amphenol-aao.com

Description:

Amphenol Aerospace offers the Matrix product line of MIL-DTL-26482, Series 2 Connectors. This series provides a bayonet coupling connector with crimp rear insertable, rear releasable contacts.

Features & Benefits:

  • Medium size, environmentally resistant connector
  • Shells size 8 to 24. Contact sizes 20, 16, and 12.
  • Recommended operating voltage to 1,000 VAC (RMS) at sea level
  • Quick positive coupling assured by 3-point bayonet coupling system
  • Eliminates mismating by the use of five key/keyway design
  • Insertion and removal of contacts from the rear of the connector assures no damage to the front that might affect the sealing characteristics
  • Utilizes same standard qualified rear-release type plastic tool for contact insertion and removal
  • Contacts are qualified to SAE AS39029 requirements
  • Grommets are constructed of tear-resistant elastomer and experience no degradation when exposed to a broad range of fluids
  • Sealing over a range of wire diameters is assured by a triple webbed grommet at the rear of the connector
  • Closed entry socket side of the insert is designed with a lead-in chamfer and a hard face that will accept a pin contact bent within pre-established limits
  • Elastomer interfacial seal on the pin side has raised barriers around each pin which displace into the socket chamber when mated, providing a positive moisture seal
  • 34 insert patterns available from 3 to 55 circuits
  • Various finishes are available
How to Order Guide

Dimensions


Insert Chart

Insert Arrangements

Insert Alternate Rotations

26482 Contact Information

Assembly Instructions

26482 Assembly Tools

Class Descriptions, Performance Specifications

Class Descriptions

Military
MIL-DTL-26482, Series 2
Amphenol/Matrix
Commercial MB1
Series
Description
Class L Class R Aluminum shell, electroless nickel finish, fluid resistant
Class E - Inactive, superseded by Class L*
Class R - Inactive, superseded by Class L*
Class A Class A Aluminum shell, black non-conductive anodized finish, fluid resistant
- Class G Stainless steel shell, passivated, fluid resistant
Class W Class W Aluminum shell, olive drab cadmium plated, corrosion/fluid resistant

* Ref. MIL-DTL-26482

 

Service Ratings

Service Rating Recommended
Operating AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Sea Level 50,000 ft. 70,000 ft. 110,000 ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200

** Service Rating is comparable to MS rating A. Miniature connectors rated Service Rating I will provide a minimum flashover voltage at
sea level of 2,000 volts AC (RMS). Service Rating II is comparable to MS Service Rating D, and will provide a minimum flashover voltage
of 2,800 volts AC (RMS) at sea level.

Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer’s hands, as
he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit.

 

Operating Temperature Range:
–65°C (–85°F) to 200°C (392°F)

Environmental Seal:
Wired, mated connectors with the specified accessory attached will meet the altitude immersion test specified in MIL-DTL-26482.

Durability:
Minimum of 500 mating cycles

Shock and Vibration Requirements:
When tested as follows, the connector shall sustain no physical damage, or electrical discontinuity exceeding one microsecond.

Shock:
Pulse of an approximate half sine wave of 300g magnitude with a duration of 3 milliseconds applied in three axes.

Vibration:
Sixteen hours of random vibration having a range of 50 to 2,000 Hz with a 41.7G peak level.

Matrix 26482 Series II Catalog
This series provides a bayonet coupling connector with crimp rear insertable, rear releasable contacts.
Complementary Product MIL-DTL-83723 Connectors
MIL-DTL-83723 Connectors
Medium-sized, environmentally resistant circular connector. Used for both general-purpose and high-temperature applications in commercial aerospace -- BACC63CM/CN, EN2997, ESC10/ESC11.
MIL-DTL-5015 (Matrix)
This crimp, rear-release high-power series provides an improved alternative to the older MIL-C-5015 solder type.
Amphenol Advantage IconComplementary External Product AS85049 Backshells
AS85049 Backshells
Backshells for Military & Aerospace applications are governed by SAE, AS85049 standard and Amphenol Backshells are designed to meet the applicable requirement of these standards.
Distributor?
Is FAI Required?
Have you ordered from us before?

Part Number
Min Qty
Max Qty
Target Price
Delivery Date
Add Part