Login
You must first login to download drawings/models.
Incorrect username or password.
You must first login to download drawings/models or register for webinars.
HDB3/HSB3 Connectors
Contact:
Description:
These high-density connectors incorporate a higher density contact pattern and lower-mated height than Amphenol’s standard low mating force rectangular connectors. HDB3 rectangular connectors utilize the same durable and reliable B3 brush contact in a tighter .070” X .060” staggered grid pattern. Available as a daughterboard and motherboard connector for both HDB3 and HSB3, as well as in I/O connector and board stacking connector configurations for HDB3.
Features & Benefits:
- High Density:
Up to 160 brush contacts in a tight .070” X .060” staggered grid pattern – allows for a small board footprint. - High Speed:
Data rates up to 6.250 Gb/s via 100 ohm matched impedance differential pairs. - Mating Cycles:
100K mating cycles vs. 2K for competitive connectors. - Average Contact Engaging/Separating Force:
1.5 ounce typical per contact. - Resistant to shock, vibration & fretting corrosion.
- Low cost for a high level of performance.
Connector Options
Performance Specifications
How to Order Guides and Dimensions
HSB Arrangements
Performance and Materials
- Durability:
100,000 mating cycles - Insertion/Extraction Force:
1.5 ounce typical per contact - Operating Temperature:
-65° to 125°C - Current Rating:
2 amperes Hot-swap 1 ampere maximum (load dependent) - Insulation Resistance:
5 gigaohms minimum - Dielectric Withstanding Voltage:
750 volts, 60 hertz, rms @ Sea Level, 250 volts, 60 hertz, rms @ 70,000 feet elevation - Solderability:
MIL-STD-202, Method 208 - Salt Fog:
48 Hours IAW MIL-STD-1344, method 1001, test condition B - Humidity:
IAW MIL-STD-1344, method 1002, type II - Vibration:
4 hours in each of 3 mutually perpendicular axes IAW MIL STD-1344, method 2005, test condition V, letter H - Shock:
1 shock along each of three mutually perpendicular axes IAW MIL-STD-1344, method 2004, test condition G - Data Rate (HSB3):
Capable of 6.250 Gbps (consult Amphenol for arrangement)
PCB Layouts
Assembly Tools
HDAS
HDAS rectangular connectors are the right high-density PCB connector when installation, cost and reliability must be considered.
MIL-DTL-55302 Low Mating Force Connectors
Utilizes the B³ brush contact system known for low mating force, stable electrical performance in high vibration, and extended service life.